DLP-521
: Detailed Level Procedure 363-206-305
Page 4 of 4 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
NOTE:
After the prompt ( < ), the system will respond to commands entered.
The command set-link:pg=( ) may be used to set the vertical size
of the displayed page on the CIT. Page (pg) length may be set from 3 to
150 lines with a default length of 24 lines. The page length is set to
default each time a new CIT session is started.
See the "Commands and Reports" section of this manual for a description of
the command formats.
8.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...