Lucent Technologies FiberReach DDM-2000 - Page 1720

DLP-536
: Detailed Level Procedure 363-206-305
Page 8 of 14 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
14. Was response correct?
If
YES
, continue with
Step 15
.
If
NO
, do
Trouble Clearing: TAP-116
.
15. Enter a y or yes and a carriage return to execute the program. Software
download may take 20 to 45 minutes.
Response:
ABN
LED lights on User Panel and a "
P
" is displayed in
SYSCTL FE ID
display in the shelf receiving the program.
PC starts download and prints the following message:
Searching for optimal transfer rate.
Handshake established at <baudrate> baud.
In progress . . . .
The dots continue to print until program installation is
complete. If floppy disks are being used, insert each
diskette when prompted. After installation is completed,
the PC prints the following completion message:
ins-prog:TID COMPLD
/* Generic a.b.c is installed */
16. Was response correct?
If
YES
, continue with
Step 17
.
If
NO
, do
Trouble Clearing: TAP-116
.
17. Did the letter "
C
" appear in the
FE ID
display?
If
NO
, proceed to
Step 32
.
If
YES
, proceed to
Step 22
.