363-206-305 Detailed Level Procedures:
Issue 3, June 2000 Page 1 of 4
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
DLP-541
Obtain Equipment, Check Software, Prepare and
Connect PC for Software Download
1.
NOTE:
The PC may be connected to the front CIT port or remotely through a
dial-up modem. If connected to the rear CIT port, a null modem is
required between the RS- 232 cable and the rear CIT port.
Obtain the following equipment:
A. IBM compatible personal computer (PC) running an MS-DOS
computer program operating system, Release 2.1 or later.
B. RS-232 cable to connect PC COM port to User panel CIT port.
C. Working copies of the new system generic program diskette(s).
D. Software Release Description for software being installed.
2. Before beginning the software installation procedure, the following is strongly
suggested:
A. Become familiar with the characteristics and operating procedures of
your PC and the MS-DOS operating system.
Reference: DLP-533
B. Operate laptop PCs on AC power during download procedures.
C. Follow proper procedures in handling the diskette(s) (floppies).
Reference: DLP-533
D. Make working copies and backup copies of the original new generic
program diskettes.
Reference: DLP-534
E. Read the Software Release Description for software being
installed.
To Next Page
Loading...