363-206-305 Circuit Order:
Issue 3, June 2000 Page 1 of 2
DDM-2000 F
IBER
R
EACH
N
ARROWBAND
S
HELF
NTP-004
Install and Test Channel Units
DO ITEMS BELOW IN ORDER LISTED . . . . FOR DETAILS, GO TO
Summary:
The procedures associated with this NTP tell how to install and test channel units.
These procedures assume the following:
• The acceptance and turn-up procedures in this manual have been completed.
• There are no alarms present on the system.
• All T0 cross-connections are made at the
SLC
-2000. For more information, refer
to 363-208-003,
SLC-2000 Access System Command and Message Manua
l.
• The circuits being tested are wired or conditioned for service at the local digital
switch (LDS).
Channel Unit Options
Refer to 363-208-001,
SLC
-2000
Access User/Service Manual
, for setting channel
unit options.
To Next Page
Loading...