Lucent Technologies FiberReach DDM-2000 - Page 378

363-206-305
Administration and Provisioning
8-20
Issue 3 June 2000
TARP
(Layer 4 provisioning)**
L4tlif (lifetime parameter)
L4ajsys(Manual adjacency
parameters)
L4ajorg
L4ajres
L4ajrd
L4ajarea
L4t1tm (timer parameters)
L4t2tm
L4t3tm
L4t4tm
L4lftm (loop detection buffer flush
timer)
L4etdc (
TARP
data cache)
L4tdcsys (
TARP
data cache
parameters)
L4tdctid
L4tdcorg
L4tdcres
L4tdcrd
L4tdcarea
1 to 65535
12 hex digits
6 hex digits
4 hex digits
4 hex digits
4 hex digits
1 to 3600 seconds
1 to 3600 seconds
1 to 3600 seconds
1 to 3600 seconds
1 to 1440 minutes
enabled, disabled
12 hex digits
20 characters
6 hex digits
4 hex digits
4 hex digits
4 hex digits
100
No default. See Note 3.
NSAP Org. ID field of
the local NE.
NSAP reserved field of
the Local NE.
NSAP routing domain
field of the local NE.
NSAP area field of the
local NE.
15 seconds
25 seconds
40 seconds
20 seconds
5 minutes
enabled
No default. See Notes
4 and 5.
No default.
NSAP Org. ID field of
the local NE.
NSAP Reserved field
of the local NE
NSAP routing domain
field of the local NE.
NSAP area field of the
local NE.
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ent-ulsdcc-l4
ACID (OS type)**
TL1 autonomous message type**
Action to assoc. message
type to OS**
See command pages.
See command pages.
enabled, disabled enabled
ent-tllmsgmap
ent-tllmsgmap
ent-tllmsgmap
Cross-connection type
Ring ID for locked
twoway, locked
m1,m2
twoway
See command
pages
ent-crs-vt1
ent-crs-vt1
See notes and footnotes on the next page
Table 8-5. DDM-2000 FiberReach Parameters Provisionable via the CIT (Continued)
Parameter Range Default
(Note 1)
Command
(Note 2)