Lucent Technologies FiberReach DDM-2000 - Page 38

Tab le s
xxxviii
Issue 3 June 2000
8-2 Software Compatibility 8-14
8-3 Software and Circuit Pack Compatibility Matrix 8-15
8-4 Parameters Provisionable via Hardware Switches 8-17
8-5 DDM-2000 FiberReach Parameters Provisionable
via the CIT 8-18
8-6 DDM-2000 FiberReach Manual VT1.5 Cross
Connections (Termination/Drop) in a 1 x 1
Configuration 8-23
8-7 DDM-2000 FiberReach Manual VT1.5 Cross
Connections (Termination/Drop) in a 1 x 7
Configuration 8-25
8-8 DDM-2000 FiberReach Manual STS-1 Cross
Connections (Termination Drop
Cross-Connections) 8-27
8-9 DDM-2000 FiberReach Manual VT1.5 Cross
Connections (Pass-Through) 1 X 1 and 1 X 7
Configurations 8-28
8-10 DDM-2000 FiberReach Manual STS-1 Cross
Connections (Pass-Through) 8-29
8-11 DDM-2000 FiberReach STS-3c 0 X 1
Cross-Connections 8-29
8-12 DDM-2000 FiberReach Manual VT1.5 Cross
Connections (Locked) in a 1 x 1 Configuration 8-30
8-13 DDM-2000 FiberReach Manual VT1.5 Cross
Connections (Locked) in a 1 x 7 Configuration 8-32
8-14 Channel Unit Slot Restriction When Using an
SPQ494 in a Three-Slot V-DT 8-68
9 Maintenance Description
9-1 DS3 Performance Monitoring Enabling 9-35
9-2 DS3 Performance Monitoring (PM) Modes 9-36
10 Technical Specifications
10-1 Transmission Interface Standards 10-110-1
9-36
9-35
8-68
8-32
8-30
8-29
8-29
8-28
8-27
8-25
8-23
8-18
8-17
8-15
8-14