363-206-305
Administration and Provisioning
8-38
Issue 3 June 2000
Note that this same configuration could be set up using the second OC-1 interface
on the 27G-U OLIUs in the main slots of the DDM-2000 OC-3 shelf at Node 1. To
do this using the same VT1.5 timeslot on the OC-1 ring, replace the VT1.5
address
m-1-2-3
with
m-2-2-3
in Step 2; all other cross-connections remain the
same.
Single-Homed Path-Switched Ring Example
8
Figure 8-2 shows an example of an OC-1 VT1.5 single-homed path-switched ring
application. The network elements on the OC-3 ring can be either DDM-2000
OC-3 Multiplexers or
SLC
-2000 Access Systems.
To Next Page
Loading...