Lucent Technologies FiberReach DDM-2000 - Page 874

SET-SECU 6of2Page SET-SECU
baudrate aremessagesTL1whichinbaudratetheSpecifies
are:parameterthisforvaluesThereceived/transmitted. 1200,
2400, 4800, 9600 and(Default), 19200.
ifonlyfor,promptedisparameterThis porttype hasparameter
ofvaluethe tl1.
NOTE:
thecommand,thisexecutingofresultaasIf baudrate
theonsessionloginactiveanychanges,valueparameter’s
out;loggeduser(s)theandterminatedbewillportspecified
users.currentandusersPrivilegedincluding
echo backechoedbetoneedsenteredcharacterthewhetherSpecifies
are:parameterthisforvaluesThenot.or enabled or,
disabled isvaluedefaultThe. enabled.
ifONLYfor,promptedisparameterThis porttype parameter
ofvaluethehas tl1.
sec inordisabled,enabled,issecuritywhetherdeterminesSecurity
Enablingport(s).DCCandCITspecifiedtheonstatelockout
topairpasswordandloginvalidaentertousersrequiressecurity
DCC-all.orCITspecifiedtheviasystemtheaccess
areparameterthisforvaluesThe enabled, disabled (default
andvalue), lockout.
topermittedtypeuseronlythestate,lockoutinissecurityWhen
aisportCIT/DCCoutlockedthethroughsystemtheaccess
loginvalidawithevenusers,non-privilegedalluser;privileged
system.theaccesstoallowednotarepair,passwordand
1:NOTE
usersnon-privilegedstate,lockouttheinissecurityWhen
arebutdatabase,login/passwordthefromdeletednotare
activeExistingsystem.theaccessingfromblockedsimply
notareusersnon-privilegedbyinitiatedsessionslogin
tosetissecurityifdropped)notis,(thataffected lockout.
2:NOTE
toequalisparameterAddresstheIf cit-1 isPorttypeand
toequal tl1 isSecurity, enabled aAsautomatically.
inshownotwillandforpromptednotisparameterthisresult,
message.confirmationthe
11-314 2000June3Issue FiberReachDDM-2000