10
SC100/200 Series Users Manual EM-6337-B Rev.15
2. FUNCTION DESCRIPTIONS
The SC100/200 Series is a multi-function controller equipped with a color LCD display with touch panel. It is designed to suit
with a wide variety of applications using two PID function blocks together with numerous computational functions.
FUNCTIONS & FEATURES
• Color LCD with touch panel
• Five Operation views (digital display, bargraph, dual-loop bargraph, short trend and user’s parameter table views)
• Enhanced screen functions for engineering (conguration, programming, tuning, realtime I/O monitoring, user’s parameter
table views, plus backup view for SC110/210)
• Universal input x 2 points, analog input x 4 points, discrete input x 6 points, pulse input x 5 points, high speed pulse input
x 1 point
• Current output (4 – 20 mA) x 2 points, voltage output (1 – 5 V) x 2 points, relay or photo-MOSFET relay output x 5 points
• RUN output (relay) x 1 point
• I/O signals can be added with remote I/O modules connected via NestBus peer-to-peer communication*
1
• Computation cycle selectable between 50 msec. and 3 sec. (control cycle selectable between 1 and 64 times of the com-
putation cycle)
• Two PID function blocks
• Advanced computation and sequence control functions
• Auto-tuning function
• Parameter input and changing with touch panel
• Function parameter setting, list printing and data downloading/uploading available with Loop Conguration Builder Software
(model: SFEW3E)
• Short trend export (CSV)*
1
, display parameter setting, saving and transfer with PC Congurator Software (model: SCCFG)
• Control and supervision by SCADA software via Modbus/TCP or RTU communication *
1
• Backup module (applicable to Mv2 only) is incorporated for manual loading: MV output is automatically switched to manual
control in case of control module abnormality *
2
• Independent power supply usable for the manual loader *
2
• Control module can be extracted at the front for replacement while MV output is maintained *
2
• Selectable housing depth for ease of using existing wires in replacement
• Separable two-piece terminal block
*1. SC200/210
*2. SC110/210
TYPICAL APPLICATIONS
• Replacement of conventional controllers
• Panel operation for small-scale instrumentation
To Next Page
Loading...
Need help?
General
