215651 97 Revision B
Figure 3.73: Suspension Linkage
1. Pull handle (B) upwards to release and raise linkage (A) fully
upwards into the vertical support.
2. Raise the header fully.
3. Shut down the engine, and remove the key from
the ignition.
4. Engage the header’s safety props.
Figure 3.74: Left Front Wheels
5. Remove the hairpin and clevis pin (A).
6. Pull the latch handle (B) to release suspension linkage (C),
and pull the suspension linkage away from spindle (D).
7. Lower the wheels slowly.
Figure 3.75: Suspension Linkage
8. Lower handle (A) to lock.
OPERATION
To Next Page
Loading...
