215651 7 Revision B
1.6 Welding Precaution
To prevent damage to sensitive electronics, welding should never be attempted on the header while it is connected to a
windrower.
WARNING
Severe damage to sensitive, expensive electronics can result from welding on the header while it is connected to the
windrower. It can be impossible to know what effect high current could have with regard to future malfunctions or
shorter lifespan. It is very important that welding on the header is not attempted while the header is connected to the
windrower.
If it is unfeasible to disconnect the header from the windrower before welding, contact your MacDon Dealer for welding
precautions detailing all electrical components that must be disconnected first for safe welding.
SAFETY
To Next Page
