215651 43 Revision B
3.3 Break-in Period
A brand-new machine must be operated gently when it is run for the first time.
NOTE:
Until you become familiar with the sound and feel of your new header, be extra alert and attentive.
WARNING
Before investigating an unusual sound or attempting to correct a problem, shut off the engine and remove the key from
the igniation.
After attaching the header to the windrower for the first time, follow these steps:
1. Operate the machine with the reels, drapers, and knives running slowly for 5 minutes. Watch and listen FROM THE
OPERATOR’S SEAT for binding or interfering parts.
NOTE:
The reels and side drapers will not operate until oil flow fills the lines.
2. Refer to 5.3.2 Break-In Inspection, page 117 and perform all specified tasks.
OPERATION
To Next Page
Loading...
