215651 253 Revision B
• MD #294858 for tapered cleats (B) (for drapers MD #220635, MD #220636, MD #220637, MD #220638, MD #220639,
MD #220640)
6.4.3 Upper Cross Auger
Figure 6.20: Upper Cross Auger
Upper Cross Auger (A) attaches in front of the backtube and
improves crop feeding into the center of the header in heavy
crop conditions. It is ideal for high-volume harvesting of forages,
oats, canola, mustard, and other tall, bushy, hard-to-feed crops.
Order from the following list of kits according to your
header model:
• D115X – MD #B6280
• D120X – MD #B6281
• D125X – MD #B6461
• D130XL – MD #B6462
• D135XL – MD #B6463
• D140XL – MD #B6464
• D145XL
79
– MD #B6465
NOTE:
The wide draper deflector option is NOT compatible with the upper cross auger option.
6.4.4 Rice Divider Rods
Figure 6.21: Rice Divider Rod
Rice divider rods attach to the left and right crop dividers and
divide tall and tangled rice crops in a similar manner to standard
crop divider rods performing in standing crops.
Installation instructions are included in the kit.
MD #B5609
6.4.5 Double Draper Drive Kit
The Double Draper Drive (DDD) kit provides power to four draper rollers instead of the usual two in order to minimize
draper slipping when using the side delivery feature in heavy forage crops.
Installation instructions are included in the kit.
NOTE:
The draper slip sensor is disabled with the installation of this kit.
OPTIONS AND ATTACHMENTS
79. This is a 12.2 m (40 ft.) auger, and is backtube mounted. It does NOT span the full length of the header.
To Next Page
Loading...
