MacDon D1X Series - Header Kits; Divider Quick Latch Kit; Stabilizer Wheels

215651 249 Revision B
6.3 Header Kits
Header options add features or enhancements to the header frame rather than a specific system or function.
6.3.1 Divider Quick Latch Kit

Figure 6.12: Divider Latch
Divider Quick Latch kits attach to the endsheets. They allow for
quick removal and storage of endsheet divider cones and, if
required, reduce the transport width of the header. Installation
instructions are included in the kit.
MD #B6158
6.3.2 Stabilizer Wheels

Figure 6.13: Stabilizer Wheel
Stabilizer wheels help stabilize the header in field conditions
that would otherwise cause the header to bounce, resulting in
uneven cutting heights. Installation and adjustment instructions
are included in the kit.
Available as an attachment for use with 9.1–13.7 m (30–45 ft.)
headers.
MD #C1986
OPTIONS AND ATTACHMENTS