MacDon D1X Series - Lodged Crop Reel Finger Kit; Reel Tine Tube Conversion Kit; Reel Endshield Kit

215651 244 Revision B
6.1.3 Lodged Crop Reel Finger Kit

$
Figure 6.3: Lodged Crop Fingers
Steel fingers (A) provided in the Lodged Crop Reel Finger kit
attach to the ends of every other tine bar and help to clear
material in heavy, hard-to-cut crops such as lodged rice.
Each kit contains three fingers for the cam end of the reel and
three fingers for the tail end. Hardware and installation
instructions are included in the kit.
MD #B4831
6.1.4 Reel Tine Tube Conversion Kit
These kits allow conversion from a five- or six-bat reel to a nine-bat reel.
Order the following bundles according to your header size and type:
• D115X – Steel Fingers – MD #B6514
• D115X – Plastic Fingers – MD #B6516
• D120X – Steel Fingers – MD #B6515
• D120X – Plastic Fingers – MD #B6517
• D125X – Steel Fingers – MD #B5656
• D125X – Plastic Fingers – MD #B5937
• D130XL – Plastic Fingers – MD #B6029
NOTE:
You must also order additional endshields when converting the reel.
6.1.5 Reel Endshield Kit

Figure 6.4: Reel Endshields
The steel shields provided in the reel endshield kit attach to the
ends of the reels and help to clear material in heavy, hard-to-cut
crops. They are standard equipment on all headers (except
those with nine-bat reels). Hardware and installation
instructions are included in the kit.
See your MacDon Dealer for more information.
OPTIONS AND ATTACHMENTS