215651 255 Revision B
6.4.9 HC10 Hay Conditioner
Figure 6.24: Hay Conditioner
The HC10 Hay Conditioner lays uniform, fluffy windrows.
Conditioning or crimping the cut hay allows the release of
moisture, resulting in faster drying times and earlier processing.
A parts list and installation and operating instructions are
included with the kit.
MD #C1982
6.4.10 Hydraulic Deck Shift Package
Figure 6.25: Hydraulic Deck Shift
This system allows Operators to shift the decks using the in-cab
console when double-swathing.
Installation and adjustment instructions are included with
the kit.
Available on 7.6–12.2 m (25–40 ft.) headers.
MD #B5664
6.4.11 Upper Cross Auger Hydraulic Kit for Double Draper Drive
This kit is required to provide hydraulic power to the upper cross auger (UCA) on headers with both UCA and double draper
drive (DDD) kits installed. Operating both options without this kit can result in damage to the UCA motor and inadequate
power to the draper drive system.
MD #B5606
OPTIONS AND ATTACHMENTS
To Next Page
