215651 250 Revision B
6.3.3 Secondary Stabilizer Wheel
The secondary stabilizer wheel is added to existing stabilizer wheels to help stabilize the header in field conditions that
would otherwise cause the header to bounce and result in uneven cutting height. Installation and adjustment instructions
are included with the kit.
Figure 6.14: Secondary Stabilizer Wheel
Available as an attachment for use with D130XL, D135XL,
D140XL, and D145XL headers.
MD #B6179
78
6.3.4 Stabilizer Wheels and Transport Package
Figure 6.15: Stabilizer Wheels and Transport
The Stabilizer Wheels and Transport Package help to stabilize
the header in field conditions that would otherwise cause the
header to bounce, resulting in uneven cutting heights. This
system is similar to the Stabilizer Wheel (MD #C1986) option.
For instructions, refer to 6.3.2 Stabilizer Wheels, page 249.
The Stabilizer Wheels and Transport Package are also used to
convert the header into transport mode for slow-speed towing
behind a properly-configured windrower (or agricultural
tractor). A tow pole and installation instructions are included in
the kit.
This option is available for use with 9.1 m (30 ft.) and wider
headers.
MD #C2009
OPTIONS AND ATTACHMENTS
78. Kit consists of one wheel assembly; two kits are required to upgrade both sides of the header.
To Next Page
Loading...
