MacDon D1X Series - Page 113

215651 99 Revision B

$
%
&
'
Figure 3.78: Wheel Position
6. Remove pin (A) and install at location (B) to secure the
linkage. Turn the pin to lock.
7. Pull pin (D), swivel wheel (C) counterclockwise 90 degrees,
and release the pin to lock.

Figure 3.79: Left Wheel in Transport Position
8. Ensure the left wheel is in the transport position as shown.

$
%
Figure 3.80: Right Rear Wheel
9. Pull the pin (A) and swivel the right rear wheel (B) clockwise
90 degrees.
OPERATION