215651 164 Revision B
%
$
&
Figure 5.85: Knife Drive V-Belts
6. Left drive ONLY: Loosen two bolts (A) on the endsheet.
7. Left drive ONLY: Turn adjuster bolt (B) counterclockwise to
loosen, and remove two V-belts (C).
$
Figure 5.86: Access Cover
8. Open access cover (A) on the endsheet behind the
cutterbar to provide clearance between the knife drive box
pulley and the endsheet.
9. Remove the knife drive belt.
Installing Timed Knife Drive Belt
The procedure for installing timed knife drive belts is the same for both sides of the header.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key before making adjustments to the machine.
MAINTENANCE AND SERVICING
To Next Page
Loading...
