215651 20 Revision B
Figure 1.33: MD #174684
MD #174684
Knife cutting hazard
WARNING
To prevent injury from a sharp cutting knife:
• Wear heavy canvas or leather gloves when working with
the knife.
• Be sure no one is near the vertical knife when removing or
rotating the knife.
Figure 1.34: MD #184372
MD #184372
General hazard pertaining to machine operation and servicing
DANGER
To prevent injury or death from the improper or unsafe
operation of the machine:
• Read the operator’s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
• Do NOT allow untrained persons to operate the machine.
• Review these safety instructions with all machine Operators
every year.
• Ensure that all safety signs are installed and are legible.
• Make certain that bystanders are clear of the header before
starting the engine and during operation of the header.
• Keep riders off of the machine.
• Keep all shields in place. Stay clear of moving parts.
• Disengage the header drive, put the transmission into
Neutral, and wait for all movement to stop before leaving
the operator’s position.
• Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
• Before servicing a header in the raised position, engage the
windrower’s cylinder safety props.
• Display a slow-moving vehicle emblem and activate the
header’s warning lights when operating the header on
roadways (unless these actions are prohibited by law).
SAFETY
To Next Page
Loading...
