Maytag MLE22PD - Top Panel - Dryer

4-26
2. Lift the back edge of the top. Slide it back
slightly to unhook the tab from the slot in the
channel at the front edge.
3. Remove the top from the dryer.
1. Remove three 1/4” hex head screws from
the back edge of the top panel.
Three 1/4” Hex
Head Screws
TOP PANEL - DRYER
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Top Panel
Front Tab
Front
Channel Slot