4-29
1. Remove the dryer front bulkhead
(See page 4-23).
2. Remove dryer belt (See page 4-25).
3. Grasp the drum and pull it out of cabinet.
DRUM - DRYER
NOTE: To avoid damage to components
in the cabinet, if the loosened belt was not
previously removed, do not allow the belt
to grab onto components in the base of the
dryer.
NOTE: The front and back drum seals are
made of a felt material. They are glued in
place. Watch for pins or other user items,
stuck in the felt, when removing the drum.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
To Next Page
Loading...
