McHale Fusion 2 troubleshooting section
14-6
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
14.12 Safety switch error
14.13 Bale transfer starts but bale fails to transfer to wrapper
Reason Solution Reference Section
Dispenser access door
open
Close panel and secure 3
Wrapper roller not
returned/ drifted down
over time
Manually bring up using
the buttons with the box
in manual
11.6.1
Man - (button 12)
Faulty motor speed
sensor/ damaged
magnet
Check sensor and
magnets, input test and
replace if necessary
11.4
11.8
RPM of wrapper <34
rpm
Set the speed on valve
& re-set the oil flow if
necessary
12.6 (B)
Reason Solution Reference Section
Transfer time not
adequate for crop
conditions
Change the transfer
time in the control box
11.6.2
(Machine set up 2)
Not enough net applied
to the bale (expands/
loses shape)
Apply more net 7.5
Low oil flow Check oil flow - ensure
a supply of 48-55 litres/
minute. If necessary
increase the tractor oil
flow accordingly
12.2
To Next Page
Loading...
