Micom P634 - Page 413

Parameter Address
Default Min Max Unit Logic Diagram
Measured data
output
MEASO: Function group MEASO
056 020
0: Without
[spacer]
Cancelling function group MEASI or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden. If the function group is cancelled from the
configuration, then all associated settings and signals are hidden.
[spacer]
MEASO: General enable USER
031 074
0: No
[spacer]
Disabling or enabling the measured data output function.
[spacer]
MEASO: Fct. assignm. BCD
053 002
060 000: MAIN: Without function Fig. 3-34, (p. 3-52)
[spacer]
Selection of the measured value to be transmitted in BCD form.
[spacer]
MEASO: Hold time output BCD
010 010
0.10 0.10 10.00 s Fig. 3-34, (p. 3-52)
[spacer]
Setting for the transmission time of the selected measured value in BCD form.
[spacer]
MEASO: Scaled min. val. BCD
037 140
0.000 0.000 1.000
[spacer]
MEASO: Scaled max. val. BCD
037 141
1.000 0.000 1.000
[spacer]
MEASO: BCD-Out min. value
037 142
0 0 399
7 Settings P634
P634/EN M/R-42-A // P634‑311‑653 7-59