Micom P634 - Page 426

Parameter Address
Default Min Max Unit Logic Diagram
Measuring-circuit
monitoring
MCM_1: Function group MCM_1
056 073
0: Without
[spacer]
MCM_2: Function group MCM_2
056 074
0: Without
[spacer]
MCM_3: Function group MCM_3
056 075
0: Without
[spacer]
MCM_4: Function group MCM_4
056 076
0: Without
[spacer]
Cancelling function groups MCM_x or including them in the configuration. If a
function group is cancelled, then all associated settings and signals are hidden,
with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Circuit breaker
failure protection
CBF_1: Function group CBF_1
056 007
0: Without
[spacer]
CBF_2: Function group CBF_2
056 082
0: Without
[spacer]
CBF_3: Function group CBF_3
056 083
0: Without
[spacer]
CBF_4: Function group CBF_4
056 084
0: Without
[spacer]
Cancelling function group CBF_x or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden, with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Limit value
monitoring
LIMIT: Function group LIMIT
056 025
0: Without
[spacer]
Cancelling function group LIMIT or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden, with the exception of this setting.
P634 7 Settings
7-72 P634/EN M/R-42-A // P634‑311‑653