Micom P634 - Page 427

Parameter Address
Default Min Max Unit Logic Diagram
Limit value
monitoring
LIM_1: Function group LIM_1
056 042
0: Without
[spacer]
LIM_2: Function group LIM_2
056 043
0: Without
[spacer]
LIM_3: Function group LIM_3
056 050
0: Without
[spacer]
Cancelling function groups LIM_x or including them in the configuration. If a
function group is cancelled, then all associated settings and signals are hidden,
with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Transformer
monitoring
TRMON: Function group TRMON
056 095
0: Without
[spacer]
Cancelling function group TRMON or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden.
Parameter Address
Default Min Max Unit Logic Diagram
Programmable Logic
LOGIC: Function group LOGIC
056 017
0: Without
[spacer]
Cancelling function group LOGIC or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden.
Parameter Address
Default Min Max Unit Logic Diagram
Programmable Logic
LOG_2: Function group LOG_2
056 089
0: Without
[spacer]
Cancelling function group LOG_2 (“Logic 2”) or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden.
7 Settings P634
P634/EN M/R-42-A // P634‑311‑653 7-73