Micom P634 - Page 703

Parameter Address
Default Min Max Unit Logic Diagram
Fault data
acquisition
FT_DA: Fault duration
008 010
Not measured 0.0 6500.0 s Fig. 3-77, (p. 3-113)
[spacer]
Display of the fault duration.
[spacer]
FT_DA: Running time
004 021
Not measured 0.00 65.00 s Fig. 3-77, (p. 3-113)
[spacer]
Display of the running time.
[spacer]
FT_DA: Fault determ. with
004 198
0: No fault Fig. 3-78, (p. 3-114)
[spacer]
This display indicates when the fault data were stored.
[spacer]
FT_DA: Run time to meas.
004 199
Not measured 0.000 65.000 s Fig. 3-78, (p. 3-114)
[spacer]
Display of the fault data acquisition time from the onset of the fault.
[spacer]
FT_DA: Fault curr. P,A prim
010 199
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. P,B prim
013 175
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. P,C prim
013 177
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. P,D prim
013 179
Not measured 0 65000 A
[spacer]
Display of the fault current as a primary quantity.
[spacer]
FT_DA: Fault curr. N,A prim
010 216
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. N,B prim
013 176
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. N,C prim
013 178
Not measured 0 65000 A
[spacer]
FT_DA: Fault curr. N,D prim
013 180
Not measured 0 65000 A
[spacer]
Display of the ground fault current as a primary quantity.
[spacer]
FT_DA: Fault curr.IP,a p.u.
025 086
Not measured 0.00 99.00 Inom Fig. 3-79, (p. 3-115)
[spacer]
FT_DA: Fault curr.IP,b p.u.
026 086
Not measured 0.00 99.00 Inom Fig. 3-79, (p. 3-115)
8 Information and Control Functions P634
P634/EN M/R-42-A // P634‑311‑653 8-165