Micom P634 - Page 830

Version Changes
Diagram
No changes.
Software
OP_RC The operating data recording buffer size has been
enlarged. It now can store up to 1000 events.
New MiCOM P30 platform software.
Many parameter labels have been modified so that
they harmonize with other MiCOM P30 devices.
DVICE Instead of one parameter for the software version
(previously: (002 120) DVICE: Software version)
the version numbers ‑6xx and ‑7xx are now separately
stored in two new parameters:
●
(010 167) DVICE: Software version 6XX
●
(010 168) DVICE: Software version 7XX
Minor version index 7xx is now starting from 700 with
each new major version 6xx.
PC, DVICE It is now possible to upload new firmware into the
device via the TCP/IP protocol. For this purpose there
are several new network settings that are not identical
to the ones already existing within function group IEC:
●
(111 004) PC: IP address
o
(111 005) PC: IP address 1
o
(111 006) PC: IP address 2
o
(111 006) PC: IP address 3
●
(111 008) PC: Subnet mask
o
(111 009) PC: Subnet mask 1
o
(111 010) PC: Subnet mask 2
o
(111 011) PC: Subnet mask 3
●
(111 016) PC: IP address mode
●
(111 017) PC: IP Enable config.
For testing purposes, information parameters store the
updated network settings for this firmware uploading
network.
●
(111 000) DVICE: IP address
●
(111 001) DVICE: Subnet mask
●
(111 003) DVICE: MAC address
COMM1 In the communication protocol per IEC 60870-5-103
positive command acknowledgement can now be set to
use either single-character E5 (as previous versions) or
a short message FT 1.5.
P634 A5 P634 Version History
A5-30 P634/EN M/R-42-A // P634‑311‑653