Mindray DPM 4 Operator's Manual

9-8
6. Two waveforms at the time of the alarm event. You can set the waveform length by
selecting from the ALM REC TIME options in the ALARM SETUP menu. Please refer to
4.4.2Alarm Setup. .
Figure 9-5 Alarm Event Recall
 UP-DOWN
The monitor is able to store a maximum of 70 alarm events. But only one alarm event can be
displayed in the ALARM RECALL window once. You can select the UP-DOWN option and then
rotate the control knob to view an earlier or later alarm event.
 L-RIGHT
You may select the L-RIGHT option and then rotate the control knob to review the 8,16,or
32-second waveforms stored.
 REC
This option allows you to print out all parameter data and waveforms displayed in the current
window using the recorder.
4
1
2
3
5
6

Mindray DPM 4 Specifications

General

Brand	Mindray
Model	DPM 4
Category	Medical Equipment
Language	English