Mindray DPM 4

10-30
10.7.3 Respiration Setup
Selecting the RESP label on the screen opens the following menu.
Figure 10-22 RESP Setup Menu
In this menu, you can perform the following settings.
 ALM Alarm on/off
ON: When a respiration rate alarm occurs, the monitor gives
alarm indications and stores the alarm;
OFF: When a respiration rate alarm occurs, the monitor
neither gives alarm indications nor stores the alarm;
When OFF is selected, the
icon is displayed on the right
of the RESP label.
 ALM LEV Alarm level
Options: HIGH, MED and LOW.
 ALM REC Alarm recording
ON: When a respiration rate alarm occurs, the monitor
enables the recording;
OFF: When a respiration rate alarm occurs, the monitor does
not enable the recording
 ALM HI Upper alarm limit
Determines the upper limit of respiration rate alarm.
 ALM LO Lower alarm limit
Determines the lower limit of respiration rate alarm.