To Next Page

To Previous Page

4-11

4.4.4 Recorder Setup

Select RECORD>> in SYSTEM SETUP menu. The following menu appears.

Figure 4-10 Recorder Setup

In this menu, you can adjust the following items:

 REC WAVE1

Select the first waveform to be recorded. The setting of this item

should be different with those of REC WAVE 2 and REC WAVE3;

otherwise, the system will adjust the setting automatically. When

OFF is selected, the first waveform will not be recorded.

 REC WAVE2

Select the second waveform to be recorded. The setting of this item

should be different with those of REC WAVE1 and REC WAVE3;

otherwise, the system will adjust the setting automatically. When

OFF is selected, the second waveform will not be recorded.

 REC WAVE3

Select the third waveform to be recorded. The setting of this item

should be different with those of REC WAVE1 and REC WAVE2;

otherwise, the system will adjust the setting automatically. When

OFF is selected, the third waveform will not be recorded.

NOTE

z If a parameter is not displayed on the screen, this parameter will not be an option

of REC WAVE 1, REC WAVE 2 and RECORD WAVE3..

Mindray DPM 4 Operator's Manual

Other manuals for Mindray DPM 4