Mindray DPM 4 Operator's Manual

11-21
11.4.5 SpO
2
Setup Menu
Selecting the SPO
2
label in the parameter window opens the following menu.
Figure 11-9 SpO2 Setup Menu
You can perform the following settings in this menu.
 ALM SpO2 alarm on/off status
ON: When a SpO2 alarm occurs, the monitor gives alarm
indications and stores the alarm;
OFF: When a SpO2 alarm occurs, the monitor neither
gives alarm indications nor stores the alarm;
When OFF is selected, the
icon is displayed on the
right of the SPO2 label.
 ALM LEV Alarm level
Options: HIGH and MED.
 ALM REC  Alarm recording
 ON: When a SpO2 alarm occurs, the
monitor enables the recording;
 OFF: When a SpO2 alarm occurs, the
monitor does not enable the recording.
 SPO2 ALM HI SpO2 upper alarm limit
 SPO2 ALM LOW SpO2 lower alarm limit
 PR ALM HI PR upper alarm limit
 PR ALM LO PR lower alarm limit

Mindray DPM 4 Specifications

General

Brand	Mindray
Model	DPM 4
Category	Medical Equipment
Language	English