C-15
C.3 Prompt Messages
Prompt messages Cause Measure
ECG1 SIGNAL
SATURATION
ECG2 SIGNAL
SATURATION
Signals of abrupt change interfere with
the ECG signal.
Check whether the electrodes
and leads are well connected.
SEARCH PULSE The SpO
2
module is searching the
pulse.
Wait till the end of the
searching.
DOMINANT
RHYTHM
CHANGE
A change happens to the patient’s
dominant rhythm.
None.
Mindray DS CO2 module
CO2 STANDBY The CO
2
module enters the
energy-saving status when switching
from the Normal mode to the Standby
mode.
None
CO2 START UP The CO
2
module is starting. Wait for the CO
2
module to
finish the startup.
CO2 CALIBRATE
ZERO
The CO
2
module is in the zeroing
status.
Wait for the CO
2
module to
finish the zeroing.
CO2 WARM UP The CO
2
module is warming itself up
after startup.
Wait for the CO
2
module to
finish warming itself up.
Oridion CO
2
module
CO2 STANDBY The CO
2
module enters the
energy-saving status when switching
from the Normal mode to the Standby
mode.
None
CO2 START UP The CO
2
module is starting. Wait for the CO
2
module to
finish the startup.
CO2 CALIBRATE
ZERO
The CO
2
module is in the zeroing
status.
Wait for the CO
2
module to
finish the zeroing.
CO2 SENSOR
START UP
The CO
2
sensor is warming itself up
after startup.
Wait for the CO
2
module to
finish warming itself up.
CO2 CALIBRATE The CO
2
module is in the calibrating
status.
Wait for the CO
2
module to
finish the calibration.
CO2 PURGING The CO
2
module is in the purging
status.
Wait for the CO
2
module to
finish the purging.
Recorder
RECORDER
INITIALIZING
The recorder is in the initializing status. Wait for the recorder to finish
the initialization.
RECORDER BUSY The recorder is recording. Wait for the recorder to finish
the recording.
AG module
AG STANDBY The AG module is in the standby
mode.
None
AG IS STARTING The AG module is starting. Wait for the AG module to
finish the startup.
AG WARM UP The AG module is warming itself up. Wait for the AG module to
finish warming itself up.
To Next Page
Loading...
Need help?
General
