Mindray DPM 4 Operator's Manual

2-15
2.6 Wireless Network Card
This monitor can be configured with a wireless network card, which is connected to the CMS
(Central Monitoring System) in the wireless mode and constructs with the CMS the monitoring
network.
Yon only need to insert the network cable into the network connector. The following figure shows
the wireless network card correctly installed.
In front of the wireless network card are three indicators that indicating its working status:
 POWER indicator
 OFF: The wireless network card is off or the patient monitor is off.
 Flashing: The wireless network card is resetting to the default.
 ON: The wireless network card is on and ready.
 WIRELESS/WLAN indicator
 OFF: The wireless network card is off or not associated with any access point.
 Flashing: The wireless network card is associating or transmitting wireless data.
 ON: The wireless network card is associated with an access point.
 ETHERNET/LAN indicator
 OFF: The wireless network card is off or not connected to an Ethernet network.
 ON: The wireless network card is connected to an Ethernet network.
Power cord
N
etwork cable

Mindray DPM 4 Specifications

General

Brand	Mindray
Model	DPM 4
Category	Medical Equipment
Language	English