10-32
10.8 Maintenance and Cleaning
WARNING
z Before cleaning the ECG cable, be sure to disconnect the monitor from the ECG
cable, or shut down the system and disconnect all power cords from the outlet.
z If the ECG cable is damaged or aged, replace with a new one.
Cleaning
The exterior surfaces of the ECG cable may be cleaned with a soft cloth, dampened with the
alcohol, and then be air-dried or dried with a clean dry cloth.
Disinfection
Disinfection may cause damage to the equipment. We recommend the disinfection be contained
in the hospital’s servicing schedule only when necessary. The equipment should be cleaned prior
to disinfection.
Sterilization
Sterilization may cause damage to the equipment. We recommend the sterilization be contained
in the hospital’s servicing schedule only when necessary. The equipment should be cleaned prior
to sterilization.