7-2
7.3 FROZEN Menu
The FROZEN menu is displayed at the lower left corner. You can perform the following settings
in this menu.
WAVE 1
Waveform 1
It determines the first frozen waveform to be printed on the recorder
paper. The options of waveform 1 include all waveforms displayed on the
screen and OFF. The waveform 1 will not be recorded when OFF is
selected.
WAVE 2
Waveform 2
It determines the second frozen waveform to be printed on the recorder
paper. The options of waveform 2 include all waveforms displayed on the
screen and OFF. The waveform 2 will not be recorded when OFF is
selected.
WAVE 3
Waveform 3
It determines the third frozen waveform to be printed on the recorder
paper. The options of waveform 3 include all waveforms displayed on the
screen and OFF. The waveform 3 will not be recorded when OFF is
selected.
RECALL
Waveform recall
It changes to L-RIGHT when selected. At this time, you can rotate the
control knob to view the frozen waveform.
REC
Record
When selected, the recorder starts printing out the selected waveform 1,
waveform 2 and waveform 3.
EXIT
This option allows you to exit the FROZEN menu and unfreeze the
waveforms.
To Next Page
Loading...
Need help?
General
