1-3
1.1.3 Cautions
CAUTION
z To ensure patient safety, use only parts and accessories specified in this manual.
z Remove the battery from the patient monitor if it will not be used or not be
connected to the power line for a long period.
z Disposable devices are intended for single use only. They should not be reused as
performance could degrade or contamination could occur.
z At the end of its service life, the product described in this manual, as well as its
accessories, must be disposed of in compliance with the guidelines regulating the
disposal of such products. If you have any questions concerning disposal of the
products, please contact with us.
z Magnetic and electrical fields are capable of interfering with the proper
performance of the device. For this reason make sure that all external devices
operated in the vicinity of the monitor comply with the relevant EMC
requirements. Mobile phone, X-ray equipment or MRI devices are a possible
source of interference as they may emit higher levels of electromagnetic
radiation.
z Before connecting the patient monitor to the power line, check that the voltage
and frequency ratings of the power line are the same as those indicated on the
label or in this manual.
z Install or carry the patient monitor properly to avoid damages caused by drop,
impact, strong vibration or other mechanical force.