10-24
Figure 10-16 Arrhythmia Alarm Setup (Mortara algorithm package)
In the menu, the ALM field indicates the alarm on/off status, REC indicates the alarm recording
on/off status and LEV indicates the alarm level. You can change the settings as described below.
ALL ALM ON All alarms on
Enables all arrhythmia alarms;
ALL ALM OFF All alarms off
Disables all arrhythmia alarms that can be disabled;
ALL REC ON All recording on
Enables the recording of all arrhythmia alarms;
ALL REC OFF All recording off
Disables the recording of all arrhythmia alarms;
ALM LEV Options: HIGH, MED and LOW.
Sets the level of all arrhythmia alarms that can be set to the
same value.
UP-DOWN Page up or down
To Next Page
Loading...
