2-10
5. Physiological alarms area
Physiological alarm messages are displayed in this area. In case of multiple messages, they
will be displayed alternately.
6. Waveforms area
This area shows the waveforms of physiological parameters. The label of a waveform is
displayed on the upper left.
7. Parameter windows
The parameter windows are located on the right of the waveform area, and are divided by
white lines. Each window is identified by a parameter label on the upper left. You may
select a parameter label to open the setup menu of this parameter. Each of the parameter is
described in more detail in the following chapters.
8. Prompt information area
This area shows the prompt messages and network status icons. Upon turning ON the
monitor, prompt information, for example “NIBP alarm disabled”, will cover the network
icon.
9. Battery symbol
10. STANDBY label
You may select this label to enter the standby mode.
11. MENU label
You can select this label to enter SYSTEM MENU.
To Next Page
Loading...
