11. Commissioning
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 149
•
Use Draw a new line when editing walls to create solid and even walls.
Adding zones to the map
Adding zones to the map helps organize robot traffic. There are several different
zones that can optimize the preferred paths and driving behavior of the robot.
For more information about what each zone does, see MiRRobot
Reference Guide on the MiR website, or see the guide How to use zones
on a map.
NOTICE
All zones are ignored when you drive the robot in Manual mode or
when you use a Relative move action (except when using Relative
move actions in Limit-robots zones).
To Next Page
Loading...
