10
FUNCTIONS AND PROGRAMMING
10.2 Programming Using Bus Interface Functions
10.2.7 Program registration
10 - 28
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
(d) Registration procedure via FTP
The following indicates the registration procedure via FTP.
1) Start Internet Explorer, and enter the C Controller module address into the
Address bar in the following format.
ftp://<User name>:<Password>@<IP address of C Controller module><Drive
name>
(Example) When logging in to the standard ROM with the factory setting
ftp://target:password@192.168.3.3/ROM
2) Log in to the C Controller module.
3) After logging in to the C Controller module, perform write and read as in normal
file operation using Explorer.
* 1 Example of Internet Explorer 6.
Remark
In addition to the registration method using Internet Explorer, the FTP command
can be used from Command Prompt to register a program to the standard ROM or
CompactFlash card of the C Controller module.
Figure 10.11 Connection via FTP
Figure 10.12 File operation
*1*1
Drag & drop to transfer file.
To Next Page
Loading...
