10
FUNCTIONS AND PROGRAMMING
10.3 Programming Using MELSEC Data Link Functions
10.3.12 Accessible ranges and devices of MELSEC data link functions
10 - 58
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
2) Accessing other station
Descriptions in 1) to 7) below are used to explain the access target.
: Accessible, : Inaccessible
(To next page)
Table10.27 Access targets at the time of other station access
No. Access target
1) A1NCPU
2) A0J2HCPU, A1SCPU(-S1), A1SHCPU, A1SJ(H)CPU, A2NCPU(-S1), A2SCPU(-S1), A2SHCPU(-S1)
3)
A2ACPU(-S1), A2UCPU(-S1), A2USCPU(-S1), A2ASCPU(-S1/-S30), A2USHCPU-S1, Q02(H)CPU-A,
Q06HCPU-A
4) A3NCPU, A3ACPU, A3UCPU
5) A4UCPU
6)
Q2ACPU(-S1), Q3ACPU, Q4ACPU, Q4ARCPU, Q2ASCPU(-S1), Q2ASHCPU(-S1), Q00JCPU, Q00CPU,
Q01CPU, Q02(H)CPU, Q06HCPU, Q12HCPU, Q25HCPU, Q12PHCPU, Q25PHCPU
7)
MELSECNET/H module (C Controller module), MELSECNET/H module (PC CPU module), MELSECNET/H board
(IBM-PC/AT-compatible personal computer)
Table10.28 Accessible devices at the time of other station access
Device
Device type
(Device name
specification)
Access target
1) 2) 3) 4) 5) 6) 7)
X
Batch
DevX
Random
Y
Batch
DevY
Random
L
Batch
DevL
Random
M
Batch
DevM
Random
Special M (SM), SB
Batch
DevSM
Random
F
Batch
DevF
Random
T (contact)
Batch
DevTT
Random
C (coil)
Batch
DevTC
Random
C (contact)
Batch
DevCT
Random
To Next Page
Loading...
Need help?
General
