12 - 24
12.3 Precautions for System Configuration
12
MULTIPLE CPU SYSTEM CONFIGURATION
(6) Access from GX Developer to programmable controller CPU via C
Controller module
The C Controller module cannot connect to GX Developer.
However, the following CPU can be accessed from GX Developer via the C Controller
module.
(a) Programmable controller CPU of another CPU No. configuring multiple CPU
system
GX Developer connected to a programmable controller CPU can access a
programmable controller CPU of another CPU No. configuring the multiple CPU
system via the C Controller module of another station.
(b) Programmable controller CPU of another station on the same network
GX Developer connected to a programmable controller CPU can access a
programmable controller CPU of another station via a network module (CC-Link
module, MELSECNET/H module) controlled by the C Controller module.
It cannot access to a programmable controller CPU of another station via a serial
communication module controlled by the C Controller module.
For more information, refer to the section describing the connection with GX
Developer in a single CPU system. ( Section 2.3 (6))
To Next Page
Loading...
