EasyManua.ls Logo

Mitsubishi Pajero Pinin 1999 - Page 154

Mitsubishi Pajero Pinin 1999
919 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GDI ± Troubleshooting
13A-82
Engine-ECU Harness Side Connector Terminal Arrangement
Terminal No. Check item Standard value, normal condition (check requirements)
6 ± 47 EGR valve (C)
15 ± 20 (at 20_C)
5 ± 47 EGR valve (D)
34 ± 47 EGR valve (A)
32 ± 47 EGR valve (B)
16 ± 47 Purge control solenoid valve 36 ± 44 (at 20_C)
44 ± 72 Engine coolant temperature sensor
5.1 ± 6.5 k (when engine coolant temperature is 0_C)
2.1 ± 2.7 k (when engine coolant temperature is 20_C)
0.9 ± 1.3 k (when engine coolant temperature is 40_C)
0.26 ± 0.36 k (when engine coolant temperature is
80_C)
46 ± Body earth
Earth Continuity (0 )
58 ± Body earth
62 ± 72 Intake air temperature sensor
5.3 ± 6.7 k (when intake air temperature is 0_C)
2.3 ± 3.0 k (when intake air temperature is 20_C)
1.0 ± 1.5 k (when intake air temperature is 40_C)
0.30 ± 0.42 k (when intake air temperature is 80_C)
67 ± Body earth Inhibitor switch <A/T>
Continuity (when the selector lever is at P or N range)
No continuity (when the selector lever is at a range other
than P or N)
79 ± 72 Accelerator pedal position switch
Continuity (when the accelerator pedal is released)
No continuity (when the accelerator pedal is slightly
depressed)
89 ± 47 Oxygen sensor heater control 11 ± 18 (at 20_C)

Table of Contents

Related product manuals