ENGINE COOLING ± Water Pump
14-14
WATER PUMP
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Engine Coolant Draining and Supplying
(Refer to P.14-9.)
D Timing Belt Removal and Installation
(Refer to GROUP 11.)
D Idler Pulley Removal and Installation
(Refer to GROUP 11A.)
24 Nm
1
10 ± 12 Nm
2
Sealant:
Mitsubishi Genuine Part No.
MD970389 or equivalent
Removal steps
1. Timing belt rear cover
" AA 2. Water pump
INSTALLATION SERVICE POINT
" AA WATER PUMP INSTALLATION
Squeeze out the sealant from the tube evenly and apply it
so that there is not too much sealant and no places without
sealant.
Specified Sealant:
Mitsubishi Genuine Parts No. MD970389 or equivalent
To Next Page
Loading...
