ENGINE COOLING ± Water Hose and Water Pipe
14-15
WATER HOSE AND WATER PIPE
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Engine Coolant Draining and Suppling
(Refer to P.14-9.)
D Engine Cover Removal and Installation
D Air Cleaner Removal and Installation
(Refer to GROUP 15.)
D Exhaust Manifold Removal and Installation
(Refer to GROUP 15.)
Sealant:
Mitsubishi Genuine Part No.
MD970389 or equivalent
10 ± 12 Nm
1
10 ± 12 Nm
22 ± 25 Nm
22 ± 25 Nm
22 ± 25 Nm
22 ± 25 Nm
22 ± 25 Nm
5, 8, 16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
13
9
12 ± 15 Nm
9
4
Removal steps
AA" " BA 1. Radiator lower hose connection
2. Thermostat case assembly
3. Water pipe
" CA 4. O-ring
5. Water fitting
6. Heater hose connection
7. Water pipe assembly
" AA 8. Water by-pass fitting
" CA 9. O-ring
D EGR valve
(Refer to GROUP 17.)
10. Water hose
11. Water hose
12. Water pipe
13. Water hose
14. Water pipe
" BA 15. Radiator upper hose connection
" AA 16. Water outlet fitting
To Next Page
Loading...
