ENGINE <4G9-GDI> ± Crankshaft Oil Seal
11A-23
CRANKSHAFT OIL SEAL
REMOVAL AND INSTALLATION
93 ± 103 Nm
7
3
2
1
10
Crankshaft
Sealant: 3M Stud locking 4170 or equivalent
Lip section
Lip section
Engine oil
6
10
5
8
7
8
4
93 ± 103 Nm
9
Crankshaft
(Engine oil:
bolt washer
surface)
(Bolt thread)
(Bolt thread)
<A/T>
<M/T>
<A/T>
<M/T>
5
(Engine oil:
bolt washer
surface)
Crankshaft front oil seal removal
steps
D Timing belt (Refer to P.11A-29.)
D Crank angle sensor
(Refer to GROUP 16.)
1. Crankshaft sprocket
2. Key
3. Crankshaft sensing blade
4. Crankshaft spacer
" CA 5. Crankshaft front oil seal
Crankshaft rear oil seal removal
steps
D Transmission assembly
(M/T: Refer to GROUP 22.)
(A/T: Refer to GROUP 23.)
D Clutch cover and disc <M/T>
AA" " BA 6. Adapter plate <A/T>
AA" " BA 7. Flywheel <M/T>
AA" " BA 8. Drive plate <A/T>
AA" " BA 9. Crankshaft adapter <A/T>
" AA 10. Crankshaft rear oil seal
To Next Page
Loading...
