GDI ± Injector Driver
13A-116
INJECTOR DRIVER
REMOVAL AND INSTALLATION
5 Nm
1
2
5 Nm
Removal steps
AA" 1. Injector driver
2. Bracket
REMOVAL SERVICE POINT
AA" INJECTOR DRIVER REMOVAL
Press the injector driver connector in the place shown in the
illustration to disconnect the injector driver connector.
Caution
1. Disconnect the battery (±) cable from its terminal
before carrying out this operation.
2. High-tension current is flowing in the harness between
the injector driver and the injector while engine is
running, and the injector driver will become hot after
the vehicle has been driven, so take care when
handling it.
Lock
To Next Page
Loading...
