FRONT AXLE ± Differential Carrier
26-28
DIFFERENTIAL CARRIER
REMOVAL AND INSTALLATION
Caution
To prevent bushings from breakage, the parts indicated by * should be temporarily tightened, and then
fully tightened with the vehicle on the ground in the unladen condition.
Pre-removal and Post-installation Operation
D Drive Shaft Removal and Installation
(Refer to P.26-19.)
D Stabilizer Bar Removal and Installation
(Refer to GROUP 33A.)
D Gear Oil Draining and Refilling (Refer to P.26-11.)
88 Nm
59 ± 69 Nm
49 Nm
Sealant:
3M ATD Part No.8661 or
equivalent
4
5
2
6
98 ± 118 Nm*
1
3
93 Nm*
93 Nm*
103 Nm
103 Nm
59 ± 69 Nm
49 ± 59 Nm
Removal steps
AA" D Support the Engine Assembly
1. Front propeller shaft connection
2. Front differential assembly and
differential mount crossmember
assembly
3. Free-wheeling clutch assembly
4. Differential mount bracket assembly
<RH>
5. Differential carrier
6. Differential mount crossmember
assembly
To Next Page
Loading...
