Mitsubishi Pajero Pinin 1999 - Door; Sealant; Service Specifications; Special Tools

BODY ± Door
42-18
DOOR
SERVICE SPECIFICATIONS
Items Standard value
Door outside handle play mm 3.7 or more
Power window operating current A 5.3 ± 2 (power supply 14.5 V ± 0.3 V at 23_C)
Door inside handle play mm 5.3 or more
Glass pad and glass
holder installation
Between glass holder and glass rear end (A) 55.0
h
o
ld
er
i
ns
t
a
ll
a
ti
on
position mm
Between glass holders (B) 419.0 ± 421.0
Between glass holder and glass front end (C) 55.0
SEALANT
Items Specified sealant Remark
Waterproof film 3M ATD Part No. 8625 or equivalent Ribbon sealer
SPECIAL TOOLS
Tool Number Name Use
MB990784 Ornament remover Door trim removal
MB990480 Window glass
holder
Power window regulator and motor assembly
removal
MB990900 or
MB991164
Door hinge
adjusting wrench
Adjustment of door fit
TROUBLESHOOTING
The power window and central door locking is controlled by the Smart Wiring System (SWS). For
troublesshooting, refer to GROUP 54B ± Troubleshooting.